1 - Once logged in to your account on the exchange, go to the “API Management” section - <a href="https://www.kucoin.com/account/api" target="_blank" rel="noopener noreferrer">https://www.kucoin.com/account/api</a>
2 - In this tab, select the key you created for use in your account J'JO, click on the “Edit” button.
3 - In the tab that opens, without changing any of the other settings that you have set before, go to the section “IP restrictions” and use the ‘x’ icon to delete the IP addresses you entered when creating the key.
4 - After deleting the old ones, copy the new IP addresses you received from J'JO into the same line. This should save the new addresses.
5 - Click “Confirm” at the top of this block and now new, correct IP addresses have been added to your API key.

Kucoin. Edit API key

1 - Log in to your account on the Crypto.com exchange website. Go to the “API Keys” section - <a href="https://crypto.com/exchange/user/settings/api-keys" target="_blank" rel="noopener noreferrer">https://crypto.com/exchange/user/settings/api-keys</a>
2 - In this tab, select the key you created for use in your J'JO account, click on the “Edit” button and go to the section of editing the key data.
3 - In that tab delete the IP addresses you entered when creating the key..
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/Zendesk/Instructions/Edit%20API%20Keys/En/Crypto.com/hnve5njhsip6ezffsobk.jpg" width="624" height="275">
4 - After deleting the old ones, copy the new IP addresses received from J'JO to the same line and click “Save” to save them. This should save the new addresses.

Crypto.com. Edit API key

1 - Log in to your account on the BingX exchange website. Go to the “API Management” section - <a href="https://www.htx.com/ru-ru/apikey/" target="_blank" rel="noopener noreferrer">https://bingx.com/account/api/</a>
2 - In this tab, select the key you created for use in your J'JO account, click on the “Edit” button and go to the IP Access Restrictions section.
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/Zendesk/Instructions/Edit%20API%20Keys/En/BingX/os7dcvff0fokqonuatmt.jpg" width="624" height="275">
3 - Delete the IP addresses you entered when you created the key.
4 - After deleting the old ones, copy the new IP addresses you received from J'JO into the same line and click “Save” to save them. This should save the new addresses.

BingX. Edit API key

1 - Log in to your account on the Digifinex exchange website. Go to “API Management” - <a href="https://www.digifinex.com/en-ww/n/user/api" target="_blank" rel="noopener noreferrer">https://www.digifinex.com/en-ww/n/user/api</a>
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/Zendesk/Instructions/Edit%20API%20Keys/Ru/Digifinex/icnh5hqrd9p0x9i8amfb.png" width="624" height="209">
2 - In this tab, select the key created for use in your J'JO account, click on the “Edit” button and go to the section of editing the key data.
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/Zendesk/Instructions/Edit%20API%20Keys/Ru/Digifinex/x0pr9kxdhb69s63ytarc.png" width="613" height="85">
3 - In the tab that opens, delete the IP addresses you entered when creating the key..
4 - After deleting the old ones, copy the new IP addresses you received from J'JO into the same line and click “Confirm” to save them. This should save the new addresses.
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/Zendesk/Instructions/Edit%20API%20Keys/Ru/Digifinex/gtoyadfpn393kpddknym.png" height="85">
5 - You now have the correct IP addresses in your API.

Digifinex. Edit API key

1 - Log in to your account on the HitBTC exchange website and go to the “API keys” section - <a href="https://hitbtc.com/settings/api-keys" target="_blank" rel="noopener noreferrer">https://hitbtc.com/settings/api-keys</a>
<img src="https://lh7-us.googleusercontent.com/docsz/AD_4nXdLMeC7WNnzdO4mOrKyRWsA6Pv40ElFjFd-znwFucSxugg7Juyiw1enq-po9wG7Y6MLW8oBIdbnxoADtAX0T9Dqjhl10-2HRjlNcn4ad5cKT5sQx65NIu2ju_0Vn9yuxlY2qBOV0PFtWPzLlqhig5jUycMRTiejg14fVQD-7w?key=xK_5fSGksW4PK9WFBVTdaA" width="624" height="209">
2 - Select the key you created for use in your J'JO account, click on the button with a pen icon in the “Actions” column and go to the section of editing the key data, click on the “Edit” button.
<img src="https://lh7-us.googleusercontent.com/docsz/AD_4nXd7UPLoY1T8L8zy-dRpn7bct1gRP5P_cyHCTwPftoP2TxcX5ltydt6yM1a2J_xSW-b28-i8OxDWPxjZyYYadIVAfJcHDIHkdSi55PfTx8Ty8iLZ5nFdV2-7YlviX0IsXIp3-RCGxlbT6XwzAfuIxIp-GyKpES3ORUpzRCJ9vg?key=xK_5fSGksW4PK9WFBVTdaA" width="442" height="438">
3 - In the tab that opens, click “Clear all”. This will remove the old addresses.
4 - After deleting the old ones, copy the new IP addresses obtained from J'JO into the same row, click “Add” to add the addresses and then “Save” to save them. 
<img src="https://lh7-us.googleusercontent.com/docsz/AD_4nXcJm0Ub3zrEYl7jkMjVVjkvgWt0PnqddB-Wt_uN3VjB6ikmGqU50qEaJGN67S9GtEhtfVKjuUbiOpX2wwUAk4QNqTbIMtvyc5zKx2Yw8Pu9sAEWm2ZOCaKUWXvuh_uyZ0xy3WrsI_bq8jBLaYTfKeQcudmCEQic7HJcht0m?key=xK_5fSGksW4PK9WFBVTdaA" width="438" height="416">
5 - Click “Save” at the bottom of this window and now the new, correct IP addresses have been added to your API key. This should save the new addresses.

HitBTC. Edit API key

1 - Log in to your account on the Gate.io exchange website. Go to the API management section - <a href="https://www.gate.io/ru/myaccount/api_key_manage" target="_blank" rel="noopener noreferrer">https://www.gate.io/ru/myaccount/api_key_manage</a>
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/Zendesk/Instructions/Edit%20API%20Keys/Ru/Gate.io/oyw4x3az6todypbmfa7n.png">
2 - In this tab, select the key you created for use in your J'JO account, click on the “Edit” button and go to the key data editing section
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/Zendesk/Instructions/Edit%20API%20Keys/Ru/Gate.io/heeasa41cpsshtwoizsj.png">
3 - In the tab that opens, delete the IP addresses you entered when you created the key.
4 - After deleting the old ones, copy the new IP addresses received from J'JO to the same line and click “Submit” to save them. This should save the new addresses.
5 - Click “Return to API List” at the bottom of this window and now new, correct IP addresses have been added to your API key.

Gate.io. Edit API key

1 -  Log in to your account on the HTX Exchange website. Go to the “API Management” section - <a href="https://www.htx.com/ru-ru/apikey/">https://www.htx.com/ru-ru/apikey/</a>
2 - In this tab, select the key you created for use in your J'JO account, click on the “Edit” button.
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/Zendesk/Instructions/Edit%20API%20Keys/En/HTX/qrrqf6lw2941dnwmbpsd.png" width="624" height="275">
3 - In the new tab, delete the IP addresses you entered when creating the key.
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/Zendesk/Instructions/Edit%20API%20Keys/En/HTX/afhnmwzwkzdging1ws5t.png" width="624" height="275">
4 - After deleting the old ones, copy the new IP addresses received from J'JO to the same line and click “Confirm” to save them. This should save the new addresses.

HTX. Edit API key

The following steps are performed in the PRO section. 1 - Go to the settings page and select the “API” tab - <a href="https://pro.kraken.com/app/settings/api" target="_blank" rel="noopener noreferrer">https://pro.kraken.com/app/settings/api</a> 2 - In the API tab, select the key you created for use in your J'JO account, click on the details and go to the Edit API section. 3 - In the tab that opens, without changing any of the other parameters you have set before, go to the IP address restriction.
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/Zendesk/Instructions/Edit%20API%20Keys/Ru/Kraken/gerrbkeplqvdumiqybxd.png"> 4 - Change the addresses you specified before to the ones you are going to use in the future, using the same delimiters and format. 5 - Click “Save” and you're done. Now you have new, correct IP addresses added to your API key.

Kraken. Edit API key

1 - Once logged in to your account on the exchange, go to the “API Management” section - <a href="https://www.binance.com/ru/my/settings/api-management" target="_blank" rel="noopener noreferrer">https://www.binance.com/ru/my/settings/api-management</a> 2 - In this tab, select the key you created for use in your account J'JO, click on the “Edit Restrictions” button.
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/Zendesk/Instructions/Edit%20API%20Keys/En/Binance/y0tpbeaatoajxiiyus6b.png"> 3 - In the tab that opens, without changing any of the other settings that you have set before, go to the section “Allow access only to trusted IP addresses (recommended)” and use the ‘x’ icon to delete the IP addresses you entered when creating the key.
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/Zendesk/Instructions/Edit%20API%20Keys/En/Binance/iguxs2rtmmgo8zbbnqdc.png"> 4 - After deleting the old ones, copy the new IP addresses you received from J'JO into the same line and click “Confirm” to save them. This should save the new addresses. 5 - Click “Save” at the top of this block and now new, correct IP addresses have been added to your API key.

Binance. Edit API key

1 - Log in to your account on the OKX Exchange website and go to the API Management section - <a href="https://www.okx.com/ru/account/my-api" target="_blank" rel="noopener noreferrer">https://www.okx.com/ru/account/my-api</a>.
2 - In this tab, select the key you created for use in your J'JO account, click on the “Reset” button and go to the key data editing section.
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/v1717139424/Zendesk/Instructions/Edit%20API%20Keys/Ru/OKX/fhekskh4fxv3edddrxx1.png">  
3 - In the tab that opens, delete the IP addresses you entered when creating the key.
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/Zendesk/Instructions/Edit%20API%20Keys/Ru/OKX/pbn2pr7cuhqpsk6nmuxb.png">
4 - After deleting the old ones, copy the new IP addresses received from J'JO to the same line and click “Confirm” to save them. This should save the new addresses.

OKX. Edit API key

1 - Log in to your account on the exchange, go to the “API” section - <a href="https://www.bybit.com/app/user/api-management" target="_blank" rel="noopener noreferrer">https://www.bybit.com/app/user/api-management</a>
2 - In the API tab, select the key you created for use in your J'JO account, click on “Edit” and go to the section of changing the key data.
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/Zendesk/Instructions/Edit%20API%20Keys/En/Bybit/gsbsny2oj48jobd4k1u0.png">
3 - In the tab that opens, without changing the other parameters you set before, go to the “API Key Permissions” section and change the IP addresses you specified before to the ones you are going to use in the future, using the same delimiters and format.
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/Zendesk/Instructions/Edit%20API%20Keys/En/Bybit/iosacihoe4umbmj2svfs.png" width="641" height="379">
4 - Click “Save” and you're done. Now new, correct IP addresses are added to your API key.

Bybit. Edit API key

Note: Each exchange has its own security settings for copying API keys, such as 2FA authentication. We do not include those screens as they are standard and their availability depends on the individual settings of your exchange account.
<h2 id="h_01HV8YMKXWXPGCSQX5YE11P7PT">To create API keys, follow these instructions:</h2>
<h3 id="h_01HV8YMKXWNYVVB8DMB5TRVA6V">Step 1</h3>
Log into your account on the BingX exchange website.
Hover the cursor over the profile button, which looks like a person icon in the top right corner. Then click on the "API Management" button located on the right side of the screen.
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/v1712919215/Zendesk/Instructions/BingX/eng/vbzscjworzgd9t8pkmok.png">
Next, you will be redirected to a new page where you need to click on the "Create API" button.
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/v1712918476/Zendesk/Instructions/BingX/eng/vpwpekos7zy6ybt5xwib.jpg">
You will be redirected to a new page where you need to assign a name to the API key.
After creating the API key, click "Edit".
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/v1712919215/Zendesk/Instructions/BingX/eng/vtmwsdjibevkmdwnpvcx.png">
Now, select the bottom option "Restrict access to trusted IP addresses" and enter the IP addresses:
*THE_KEY_TO_REPLACE_THE_IP_ADDRESS*
Next check the box "Spot Trading".
Once you have added the IP addresses and checked the box, click "Save".
<h3 id="h_01HV8YMKXWA5DR3SXEAXSADG6D">Step 2</h3>
Now that the keys are created, you need to copy the "API Key" and "Secret Key" so that you can enter them into the J'JO.
Important: You will not be able to see your Secret Key again if you exit this page or refresh it. Please copy and save it in a secure place.
Please note that if there is no balance in your Binance account, you won't be able to connect API keys.
<h3 id="h_01HV8YMKXWJMN0DWA1DD5R59KT">Step 3</h3>
Copy the "API Key" and "Secret Key" from the exchange and paste them into the corresponding fields in your J'JO account.
After copying the keys to the correct fields, click the "Connect" button.
Congratulations! You have successfully connected your API keys to J'JO. Now you can invest in J'JO system indexes or create your own cryptocurrency index or portfolio.

How to connect BingX exchange to J'JO?

Note: Each exchange has its own security settings for copying API keys, such as 2FA authentication. We do not include those screens as they are standard and their availability depends on the individual settings of your exchange account.
<h2 id="h_01HK4EDFYK2VQ74YWYJ5YXKASF">To create API keys, follow these instructions:</h2>
<h3 id="h_01HK4EDFYKZDK1M3CNJC2YZJJ0">Step 1</h3>
Log into your account on the Binance exchange website.
Hover the cursor over the profile button, which looks like a person icon in the top right corner.. Then select the "Account" option and in the window that opens, click on the "API Management" button located on the left side of the screen.
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/v1704257916/Zendesk/Instructions/Binance/ENG/1new.png">
You can also create and configure API keys using the exchange's mobile application. To access the API key settings section, open the app and type "API Management" into the search bar, located in the upper left corner next to a profile icon shaped like a person. After entering this, click on the option that appears.
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/v1691570084/Zendesk/Instructions/Binance/ENG/app.png" width="351" height="479">
Next, both in the browser version of the exchange and in the mobile application, you will be redirected to a new page where you need to click on the "Create API" button.
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/v1690269476/Zendesk/Instructions/Binance/ENG/2.jpg">
Select the API key type "System-generated".
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/v1690269477/Zendesk/Instructions/Binance/ENG/3.jpg" width="400" height="373">
You will be redirected to a new page where you need to assign a name to the API key.
After creating the API key, click "Edit".
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/v1691633923/Zendesk/Instructions/Binance/ENG/4.jpg">
Now, select the bottom option "Restrict access to trusted IP addresses" and enter the IP addresses separated by a space:
*THE_KEY_TO_REPLACE_THE_IP_ADDRESS*
Next check the box "Enable spot and margin trading".
Once you have added the IP addresses and checked the box, click "Save".
<h3 id="h_01HK4EDFYK9RXQT7W51076CC1M">Step 2</h3>
Now that the keys are created, you need to copy the "API Key" and "Secret Key" so that you can enter them into the J'JO.
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/v1691571836/Zendesk/Instructions/Binance/ENG/5.png">
Important: You will not be able to see your Secret Key again if you exit this page or refresh it. Please copy and save it in a secure place.
Please note that if there is no balance in your Binance account, you won't be able to connect API keys.
<h3 id="h_01HK4EDFYM60AZ4C9ESF3P6G38">Step 3</h3>
Copy the "API Key" and "Secret Key" from the exchange and paste them into the corresponding fields in your J'JO account.
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/v1690269476/Zendesk/Instructions/Binance/ENG/6.png">
After copying the keys to the correct fields, click the "Connect" button.
Congratulations! You have successfully connected your API keys to J'JO. Now you can invest in J'JO system indexes or create your own cryptocurrency index or portfolio.
<h3 id="h_01HK4EFQ0WWY6DNJW00JBS6SYS">Step 4</h3>
To successfully invest in the cryptocurrency market with J'JO, your assets must be hold in one of three coins: USDT, ETH or BTC, and must be in the "Spot" section of your Binance wallet.
If after funding your wallet or buying cryptocurrency, your assets are in a different section of your wallet, such as the "Funding" section, follow these steps to transfer them to the "Spot" section:
<ol>
<li>Go to the "Assets" section of your wallet by clicking on the profile button in the form of a human icon in the upper right corner and selecting the "Assets" option.</li>
<li>In the window that opens, click on the "Refills" button located on the left side of the screen.</li>
<li>If coins are displayed in this section, select the coin you wish to transfer, for example USDT. Click on the icon in the form of three vertical dots and then click on the "Transfer" button next to the coin.<img src="https://res.cloudinary.com/jjoapp-io/image/upload/v1703840544/Zendesk/Instructions/Binance/ENG/7.png">
</li>
<li>In the window that opens, select the wallet section from which you want to transfer the coin (e.g. "Deposits" or any other) and the section to which you want to transfer the coin ("Fiat and Spot").                                                              
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/v1703840543/Zendesk/Instructions/Binance/ENG/8.png" width="368" height="421">
 
</li>
<li>Enter the amount of the coin and click on the "Confirm" button.</li>
</ol>
After completing these steps, your assets will be successfully transferred to the "Spot" section of the wallet and you can start investing in J'JO system indices.
 
<div id="gtx-trans" style="position: absolute; left: -41px; top: 2270.92px;">
<div class="gtx-trans-icon"> </div>
</div>

How to connect Binance exchange to J'JO?

Note: Each exchange has its own security settings for copying API keys, such as 2FA authentication. We do not include those screens as they are standard and their availability depends on the individual settings of your exchange account.
<h2 id="h_01HA1KZ5GTQTND5AQ7V2CGEZR6">To create API keys, follow these instructions:</h2>
<h3 id="h_01HA1KZ5GVVG44B1MA8D5KHDJZ">Step 1</h3>
Log into your account on the Crypto.com exchange website.
In the top right corner, click on the profile button, which looks like a "circle with initials". Then select the "Security" option.
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/v1690271795/Zendesk/Instructions/Crypto.com/Eng/1.jpg">
Go to the "API Keys" tab and click on the "Create New API Key" button.
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/v1690271795/Zendesk/Instructions/Crypto.com/Eng/2.jpg">
You will be redirected to a new page where you need to enter a name for the API key.
After entering the name, on the next page, select the options "Can Read" and "Enable Trading".
Next, enter the IP addresses of J'JO in the "<label class="radio-item" style="height: 28px;" data-v-012892ab="">Restricted to certain IPs</label>" field.
Enter IP addresses one at a time, pressing the + button after each IP address entry.
*THE_KEY_TO_REPLACE_THE_IP_ADDRESS*
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/v1694419044/Zendesk/Instructions/Crypto.com/Eng/3.png">Note: One of the conditions for creating API keys is to provide an IP address. Make sure you fill in the IP address line. The IP address can be found on the exchange page in your J'JO account.
<h3 id="h_01HA1KZ5GVF74DQ55XHYD4NKC7">Step 2</h3>
Now that the keys are created, you need to copy the "API Key" and "Secret Key" so that you can enter them into the J'JO<img src="https://res.cloudinary.com/jjoapp-io/image/upload/v1694419072/Zendesk/Instructions/Crypto.com/Eng/4.png">Important: You will not be able to see your "Secret Key" again if you exit this page or refresh it. Please copy and save it in a secure place.
After copying the API keys, click the "Save" button.
<h3 id="h_01HA1KZ5GVDC1F4AYH69YR3Y41">Step 3</h3>
Insert the "API Key" and "Secret Key" into the corresponding fields in your J'JO account.
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/v1690271794/Zendesk/Instructions/Crypto.com/Eng/5.png">
After copying the keys to the correct fields, click the "Connect" button.
Congratulations! You have successfully connected your API keys to J'JO. Now you can invest in J'JO system indexes or create your own cryptocurrency index or portfolio.
<div id="gtx-trans" style="position: absolute; left: -16px; top: 920.062px;">
<div class="gtx-trans-icon"> </div>
</div>

How to connect Crypto.com exchange to J'JO?

Note: Each exchange has its own security settings for copying API keys, such as 2FA authentication. We do not include those screens as they are standard and their availability depends on the individual settings of your exchange account.
<h2 id="h_01HMNQVCQVZRHQ5F4VXNZWXMAZ">To create API keys, follow these instructions:</h2>
<h3 id="h_01HMNQVCQVCMG7WG77H36F2J7K">Step 1</h3>
Log into your account on the DigiFinex exchange website.
Click on the Profile button, which looks like a person icon in the top right corner. After click the UID button.
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/Zendesk/Instructions/DigiFinex/Eng/1.png">
You will be redirected to a new profile page. Click on "API Settings" in the lower left corner.
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/Zendesk/Instructions/DigiFinex/Eng/2.jpg">
Press the "Create API" button. 
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/Zendesk/Instructions/DigiFinex/Eng/3.jpg">
In the opened window, you need to first come up with a name for the API key, for example, "JJO".
Next, select the checkboxes "Market information", "Spot and margin trading". Then save the API keys. Make sure "Deposit &amp; Withdrawal" is not selected.
It is also important to enter the J'JO IP addresses in the Bind IP address field. When entering IP addresses, separate them with commas.
*THE_KEY_TO_REPLACE_THE_IP_ADDRESS*
Pay attention to the screenshot below.
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/Zendesk/Instructions/DigiFinex/Eng/4.jpg" width="421" height="567">
 Note: One of the conditions for creating API keys is providing an IP address. Make sure you fill in the IP address field.
<h3 id="h_01HMNQVCQV9BA3RWGSB6NZP6KS">Step 2</h3>
Now that the keys are created, you need to copy the "API Key" and "Secret Key" so that you can enter them into the J'JO app.
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/Zendesk/Instructions/DigiFinex/Eng/5.jpg">
Important: You will not be able to see your Secret Key again if you exit this page or refresh it. Please copy and save it in a secure place.
<h3 id="h_01HMNQVCQVNAHN5J6QTDD7G3RR">Step 3</h3>
Copy the "API Key" and "Secret Key" from the exchange and paste them into the corresponding fields in your J'JO account.
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/Zendesk/Instructions/DigiFinex/Eng/6-3.png">
After copying the keys to the correct fields, click the "Connect" button.
Congratulations! You have successfully connected your API keys to J'JO!
<h3 id="h_01HMNRX6FD76PARSC1V0ZT6RV0">Step 4</h3>
To successfully invest in the cryptocurrency market with J'JO, your assets must be in one of the three coins of your choice: USDT, ETH or BTC, and must be in the "Spot" wallet of the Digifinex exchange.
If after funding your exchange wallet or buying cryptocurrency your assets was placed in a different section of the wallet, for example, in the "Margin" section, follow the steps below to transfer them to the "Spot" section:
<ol>
<li>
Go to the "Assets" section of your wallet by clicking on the "Balance" button on the home page.
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/Zendesk/Instructions/DigiFinex/Eng/shnb8jsqljn1ughybh15.png">
</li>
<li>In the window that opens, click on the "My Balance" button on the left side of the screen. Make sure that the coins you need are in the Spot section. If the required coins are not there, select the coin you want to transfer, for example USDT. Click on the "transfer" button next to the coin. 
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/Zendesk/Instructions/DigiFinex/Eng/oygke3sx84gqdzckxnvp.png">
</li>
<li>
In the opened window select the wallet section from which you want to transfer the coin (for example, "Margin" or any other) and the section to which you want to transfer the coin ("Spot").
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/Zendesk/Instructions/DigiFinex/Eng/mgafdlxyczktcz15qds8.png" width="438" height="428">
</li>
<li>
Enter the amount of the coin and click on the "Confirm" button.
</li>
</ol>
After completing these steps, your assets will be successfully transferred to the "Spot" section of the wallet and you can start investing in J'JO System Indexes.
<div id="gtx-trans" style="position: absolute; left: -29px; top: 1534.48px;">
<div class="gtx-trans-icon"> </div>
</div>

How to connect DigiFinex exchange to J'JO?

Note: Each exchange has its own security settings for copying API keys, such as 2FA authentication. We do not include those screens as they are standard and their availability depends on the individual settings of your exchange account.
<h2 id="h_01HK4F5258PJJB7HDSA6HTP5BJ">To create API keys, follow these instructions:</h2>
<h3 id="h_01HK4F5258SREB2RYFMXQKNZRQ">Step 1</h3>
Log into your account on the Gate.io exchange website.
Click on the Profile button, which looks like a person icon in the top right corner.
Click on "API Management".
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/Zendesk/Instructions/Gate.io/Eng/1.png">
On the opened page, click on the "Create API Key" button.
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/Zendesk/Instructions/Gate.io/Eng/2.png">
You will be redirected to a new page where you need to configure the API key.
In the "API Key Remark" field, enter a name for the API key, for example, "JJO".
In the "IP Permissions" field, paste the J'JO IP addresses separated by commas:
*THE_KEY_TO_REPLACE_THE_IP_ADDRESS*
Choose "API v4 key" as the API key type, then select "Account Type" - Trading Account.
Provide permissions for the API key, as shown in the screenshot below, and then click the "Submit" button.
When creating API keys, make sure that you check only the required items.
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/v1705538805/Zendesk/Instructions/Gate.io/Eng/3.png" width="450" height="979">
Note: One of the conditions for creating API keys is to provide IP addresses. Make sure you fill in the IP address line. 
<h3 id="h_01HK4F5258J1E475XY933NFPD3">Step 2</h3>
Now that the keys have been created, you need to copy the "API Key" and "Secret Key" to enter them in J'JO.
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/v1705538805/Zendesk/Instructions/Gate.io/Eng/4.png" width="450" height="800">
Important: You will not be able to see your Secret Key again if you exit this page or refresh it. Please copy and save it in a secure place.
<h3 id="h_01HK4F52583WB6T3AP4VC5GB1J">Step 3</h3>
Copy the "API Key" and "Secret Key" from the exchange and paste them into the corresponding fields in your J'JO account.
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/Zendesk/Instructions/Gate.io/Eng/5.png">
After copying the keys to the correct fields, click the "Connect" button.
Congratulations! You have successfully connected your API keys to J'JO. Now you can invest in J'JO system indexes or create your own cryptocurrency index or portfolio.
<h3 id="h_01HK4F6FYPBJWG6C7FT1DFKJ1M">Step 4</h3>
To successfully invest in the cryptocurrency market with J'JO, your assets must be hold in one of three coins of your choice: USDT, ETH or BTC, and must be in the "Spot" section of your Gate exchange wallet.
If after funding your exchange wallet or buying cryptocurrency your assets are in another section of your wallet, for example, in the "Payment" or "Futures" section, follow the steps below to transfer them to the "Spot" section:
<ol>
<li>Go to the "Funds Management" section of your wallet. To do this, hover over the "Wallet" button located in the upper right corner of the screen and select the "Manage Funds" option. Then go to the "Funds Overview" section.</li>
<li>In the window that opens, review all sections of the wallet. If you find assets in any section other than "Spot", go to that section by clicking on it.<img src="https://res.cloudinary.com/jjoapp-io/image/upload/v1703922675/Zendesk/Instructions/Gate.io/Eng/6.png">
</li>
<li>Select the coin you want to transfer, for example USDT, and click on the "Transfer" button opposite the coin.<img src="https://res.cloudinary.com/jjoapp-io/image/upload/v1703922675/Zendesk/Instructions/Gate.io/Eng/7.png">
</li>
<li>In the window that opens, specify the wallet section from which you want to transfer the coin (e.g. "Payment" or any other) and the section you want to transfer the coin to ("Spot").
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/v1703922675/Zendesk/Instructions/Gate.io/Eng/8.png" width="466" height="403">
</li>
<li>Enter the amount of coin you want to transfer and click on the "Confirm" button.</li>
</ol>
After completing these steps, your assets will be successfully transferred to the "Spot" section and you can start investing in J'JO System Indexes.
<div id="gtx-trans" style="position: absolute; left: -41px; top: 1095.55px;">
<div class="gtx-trans-icon"> </div>
</div>

How to connect Gate.io exchange to J'JO?

Note: Each exchange has its own security settings for copying API keys, such as 2FA authentication. We do not include those screens as they are standard and their availability depends on the individual settings of your exchange account.
<h2 id="h_01HK4FPR3PYYYP0SXDBQY11AJX" class="p1">To create API keys, follow these instructions:</h2>
<h3 id="h_01HK4FPR3P0QKK4BGKSS2BBPA8">Step 1</h3>
Log into your account on the OKX exchange website.
Click on the profile button, which looks like a person icon in the top right corner. Click on "API" button.
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/v1690282134/Zendesk/Instructions/OKX/Eng/1.jpg">
You can also create and configure API keys using the exchange's mobile application. To access the API key settings section, open the app and tap the profile button shaped like a square in the upper left corner. Scroll down to the tools section and select the "API" function.
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/v1691573268/Zendesk/Instructions/OKX/Eng/app.png" width="349" height="552">
Next, both in the browser version of the exchange and in the mobile application, you will be redirected to a new page where you need to click on the "Create APIs" button.
Select the item "API Trading".
Create of any name for the key, for example "JJO" and create a password for the API key in the "Passphrase" field. This password will be used when you later link your API keys to your J'JO account. (Note that this password will be different from your "Trade password")
Next add the IP addresses in the empty field separated by commas without spaces:
*THE_KEY_TO_REPLACE_THE_IP_ADDRESS*
Below in the Permission section select the "Read" and "Trade" options. Save the API keys. 
Pay attention to the screenshot below.
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/Zendesk/Instructions/OKX/Eng/2.jpg" width="518" height="329">
<h3 id="h_01HK4FPR3PB1YXPBQXGTDQW9HX">Step 2</h3>
Now that the keys are created, you need to copy the "API Key" and "Secret Key" so that you can enter them into the J'JO app.
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/v1706912368/Zendesk/Instructions/OKX/Eng/3.png" width="450" height="583">
Important: You will not be able to see your Secret Key again if you exit this page or refresh it. Please copy and save it in a secure place.
<h3 id="h_01HK4FPR3P357CVDFKX2YV9YMC">Step 3</h3>
Copy the "API Key" and "Secret Key" from the exchange and paste them into the corresponding fields in your J'JO account.
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/Zendesk/Instructions/OKX/Eng/4.png">
After the keys are copied into the correct fields, write your API password and click "Connect Exchange"
 Congratulations! You have successfully connected your API keys to J'JO. Now you can invest in J'JO system indexes or create your own cryptocurrency index or portfolio.
<h3 id="h_01HK4FRV8D0BTH390DW4TYA3CD">Step 4</h3>
To successfully invest in the cryptocurrency market with J'JO, your assets must be hold in one of the three coins of your choice: USDT, ETH or BTC, and must be in the "Trading Account" section of your OKX exchange wallet.
If after funding your exchange wallet or buying cryptocurrency your assets are displayed in a different section of the wallet, for example, in the "Funding" section, follow the steps below to transfer them to the "Trading Account" section:
<ol>
<li>Access the "My Assets" section of your wallet by hovering over the "Assets" button in the upper right corner of the screen and selecting the "My Assets" option.</li>
<li>In the new window, click on the "Funding" button located at the top above the "Estimated Value" bar.</li>
<li>If coins are displayed in this section, you need to select the coin you want to transfer. USDT, for example. Click on the icon in the form of three horizontal dots and then on the "Transfer" button located opposite the coin.<img src="https://res.cloudinary.com/jjoapp-io/image/upload/v1703901963/Zendesk/Instructions/OKX/Eng/5.png">
</li>
<li>In the window that opens, select the wallet section from which you want to transfer the coin (e.g., "Funding" or any other) and the section to which you want to transfer the coin (e.g., "Trading").
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/v1703901964/Zendesk/Instructions/OKX/Eng/6.png" width="502" height="391">
</li>
<li>Enter the amount of coin you want to transfer and click on the "Confirm" button.</li>
</ol>
After completing these steps, your assets will be successfully transferred to the "Trading Account" section and you can start investing in J'JO System Indexes
<div id="gtx-trans" style="position: absolute; left: -35px; top: 1437.2px;">
<div class="gtx-trans-icon"> </div>
</div>

How to connect OKX exchange to J'JO?

Note: Each exchange has its own security settings for copying API keys, such as 2FA authentication. We do not include those screens as they are standard and their availability depends on the individual settings of your exchange account.
<h2 id="h_01HABFP53DVJCSRKE2ACVQ7DED">To create API keys, follow these instructions:</h2>
<h3 id="h_01HABFP53DEWMA14J5C6ZR54DW">Step 0 </h3>
In order to connect Bybit exchange you need to have at least 10 USDT on your spot account. You can find instruction how to make deposit to Bybit <a href="https://learn.bybit.com/bybit-guide/make-a-deposit/" target="_blank" rel="noopener noreferrer">here</a>.
To successfully invest in the cryptocurrency market with J'JO, your assets must be hold in one of the three coins of your choice: USDT, ETH or BTC, and must be in the "Spot" wallet of the exchange or in the "Unified trading" wallet, in case you have activated the "Unified Trading Account" on the Bybit exchange.
If after funding your exchange wallet or buying cryptocurrency, your assets end up in a different section of your wallet, such as the "Funding" section, follow the steps below to transfer them to the "Spot" or "Single Trade" section:
<ol>
<li>Go to the section of your wallet called "Funding" by clicking on the "Assets" button in the upper right corner and selecting "Funding Account".</li>
<li>Select the coin you want to transfer for example USDT and click on the "Transfer" button next to the coin.<img src="https://res.cloudinary.com/jjoapp-io/image/upload/Zendesk/Instructions/Bybit/ENG/7.png">
</li>
<li>In the window that opens, select the wallet section from which you want to transfer the coin: "Funding", for example. Also select the section you want to transfer the coin to: "Spot" or "Unified trading".
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/Zendesk/Instructions/Bybit/ENG/8.png" width="358" height="378">
</li>
<li>Enter the amount of the coin and click on the "Confirm" button.</li>
</ol>
After completing these steps, your assets will be successfully transferred to the "Spot" section of the wallet and you can start investing in J'JO system indices.
<h3 id="01HX6H2ZCW4KG7H6J4H6TP1NQA">Step 1</h3>
Log into your account on the Bybit exchange website.
Click on the profile button in the form of a person icon in the upper right corner. Then select the "API" option.
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/Zendesk/Instructions/Bybit/ENG/1.jpg">
You can also create and configure API keys using the exchange's mobile application. To access the API key settings section, open the app and type "API Management" into the search bar, located in the upper left corner next to a profile icon shaped like a person. After entering this, click on the option that appears.
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/Zendesk/Instructions/Bybit/ENG/app.png" width="351" height="398">
Next, both in the browser version of the exchange and in the mobile application, you will be redirected to a new page where you need to click on the "Create New Key" button.
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/Zendesk/Instructions/Bybit/ENG/2.jpg">
Choose the API key type "System-generated API Keys".
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/Zendesk/Instructions/Bybit/ENG/3.jpg" width="450" height="381">
Next, come up with a name for the key, such as JJO, and choose "Read-write".
Now select the option "The access to OpenAPI is only available for IP addresses with special permission" and insert the IP addresses separated by commas.
*THE_KEY_TO_REPLACE_THE_IP_ADDRESS*
Next check the boxes as shown in the image below and click "Submit".
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/Zendesk/Instructions/Bybit/ENG/4.png" width="640" height="1230">
<h3 id="h_01HABFP53D5ZSAJYYG4JR0KBDB">Step 2</h3>
Now that the keys are created, you need to copy the "API Key" and "Secret Key" so that you can enter them into the J'JO.
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/Zendesk/Instructions/Bybit/ENG/5.jpg" width="421" height="619">
Important: You will not be able to see your Secret Key again if you exit this page or refresh it. Please copy and save it in a secure place.
<h3 id="h_01HABFP53E7X3C7A98A3GEF7C4">Step 3</h3>
Copy the "API Key" and "Secret Key" from the exchange and paste them into the corresponding fields in your J'JO account.
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/Zendesk/Instructions/Bybit/ENG/6.png">
After copying the keys to the correct fields, click the "Connect" button.
 Congratulations! You have successfully connected your API keys to J'JO. Now you can invest in J'JO system indexes or create your own cryptocurrency index or portfolio.
Important: you need to meet the following conditions to connect to the ByBit exchange
<ul>
<li>You must have a verified account with completed KYC procedure.</li>
<li>The balance in your spot wallet must be more than $10.</li>
</ul>
 
<div id="gtx-trans" style="position: absolute; left: -29px; top: 1886.98px;">
<div class="gtx-trans-icon"> </div>
</div>

How to connect ByBit exchange to J'JO?

Note: Each exchange has its own security settings for copying API keys, such as 2FA authentication. We do not include those screens as they are standard and their availability depends on the individual settings of your exchange account.
<h2 id="h_01HGDTKEXSZGKFEVX11T0ZPZTX">To create API keys, follow these instructions:</h2>
<h3 id="h_01HGDTKEXS9S9K7185XH8EN7PJ">Step 1</h3>
Log into your account on the HitBTC exchange website.
Click on the gear icon in the upper right corner and select "API keys".
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/v1690281604/Zendesk/Instructions/HitBTC/Eng/1.jpg">
You will be redirected to a new page where you need to click "New API key".
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/v1690281604/Zendesk/Instructions/HitBTC/Eng/2.jpg">
<h3 id="h_01HGDTKEXSTY1685K5KH5NNWKN">Step 2</h3>
Now that the keys are created, you need to copy the "API Key" and "Secret Key" so that you can enter them into the J'JO app.
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/v1690281604/Zendesk/Instructions/HitBTC/Eng/3.jpg" width="451" height="472">
Important: You will not be able to see your Secret Key again if you exit this page or refresh it. Please copy and save it in a secure place.
<h3 id="h_01HGDTKEXSQ4J7YEBQ1AF4BH19">Step 3</h3>
Enter a name for the API key in the "Edit API key" form.
Important: Enter J’JO IP addresses in the IP Whitelist section and click the "Edit" button. You will find the IP addresses on the HitBTC API key connection page in your J’JO account. You need to do it before setting permissions.
*THE_KEY_TO_REPLACE_THE_IP_ADDRESS*
After select "Order book", "Place/cancel orders" and "Payment information".
Important: After click "save" you will receive confirmation email with link to confirm API changes, click on it.
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/v1690281604/Zendesk/Instructions/HitBTC/Eng/4.jpg" width="450" height="465">
After that click the "Save" button on the exchange.
<h3 id="h_01HGDTKEXSWHKT6QQRR423YHHE">Step 4</h3>
Copy the "API Key" and "Secret Key" from the exchange and paste them into the corresponding fields in your J'JO account.
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/v1690281604/Zendesk/Instructions/HitBTC/Eng/5.png">
After copying the keys to the correct fields, click the "Connect" button.
Congratulations! You have successfully connected your API keys to J'JO!
<h3 id="01HJSSYRP02PPMJ4SDZQC0S18S">Step 5 </h3>
To successfully invest in the cryptocurrency market with J'JO, your assets must be in one of the three coins of your choice: USDT, ETH or BTC, and must be in the "Spot" wallet of HitBTC exchange.
If after funding the exchange wallet or buying cryptocurrency your assets are in another section of the wallet, for example, in the "Refills" section, follow the steps below to transfer them to the "Spot" section:
<ol>
<li>
On the main page of the exchange, click on Account button.
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/v1705835311/Zendesk/Instructions/HitBTC/Eng/zxctljssjhdgn84pm7an.png">
</li>
<li>
If desired coins have zero Spot balance, select the coin you want to transfer, e.g. USDT. Click on the "Transfer" button next to the coin.
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/v1705835311/Zendesk/Instructions/HitBTC/Eng/rtqpew3zjqn2q4yxh7bi.png">
</li>
<li>
In the window that opens, select the wallet section from which you want to transfer the coin (e.g. "Wallet" or any other) and the section to which you want to transfer the coin ("Spot").
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/v1705835311/Zendesk/Instructions/HitBTC/Eng/y5hz6k9sxyrtrpbi2gqe.png" width="486" height="403">
</li>
<li>
Enter the amount of the coin and click on the "Transfer" button.
</li>
</ol>
After completing these steps, your assets will be successfully transferred to the "Spot" section of the wallet and you can start investing in J'JO System Indexes.
 
<div id="gtx-trans" style="position: absolute; left: 20px; top: 1317.34px;">
<div class="gtx-trans-icon"> </div>
</div>

How to connect HitBTC exchange to J'JO?

Note: Each exchange has its own security settings for copying API keys, such as 2FA authentication. We do not include those screens as they are standard and their availability depends on the individual settings of your exchange account.
<h2 id="h_01HK4K3VXTT2GH1KV0AA89NMDB">To create API keys, follow these instructions:</h2>
<h3 id="h_01HK4K3VXT6Y4FQBJH5KYTB0DJ">Step 1</h3>
Log into your account on the HTX exchange website.
Click on the Profile button, represented by a person icon, located in the top right corner. Then select the "API Management" option.
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/v1690281001/Zendesk/Instructions/Huobi/Eng/1.jpg">
You can also create and configure API keys using the exchange's mobile app. To go to the "API Management" section, open the app and tap on the profile button shaped like a person in the upper left corner. Next, in the upper right corner, tap on the "gear" icon and select the "Trading Settings" option. Scroll down to the "Other" section and choose the "API Management" feature.
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/v1691577484/Zendesk/Instructions/Huobi/Eng/app.png" width="350" height="440">
Next, as in the browser version of the exchange as well as in the mobile app, you will be redirected to a new page where you need to click on the "Create API" button.
On the page that opens, enter a name for the API key, for example, "JJO".
Check the "Trade" box and enter the J'JO IP addresses in the "IP Address" field, separating them with commas and without spaces. 
*THE_KEY_TO_REPLACE_THE_IP_ADDRESS*
After you have added the IP addresses and checked the box, click the "Create" button.
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/v1690281001/Zendesk/Instructions/Huobi/Eng/2.jpg">
<h3 id="h_01HK4K3VXT64RBBHFMVK7XX2G2">Step 2</h3>
Now that the keys are created, you need to copy the "Access Key" and "Secret Key" so that you can enter them into the J'JO app.
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/v1690281001/Zendesk/Instructions/Huobi/Eng/3.jpg" width="451" height="492">
Important: You will not be able to see your Secret Key again if you exit this page or refresh it. Please copy and save it in a secure place. Please also note that if there is no balance on your HTX account then you wouldn't be able to connect your API keys.
<h3 id="h_01HK4K3VXTME61SXA7CY6VW82D">Step 3</h3>
Copy the "Access Key" and "Secret Key" from the exchange and paste them into the corresponding fields in your J'JO account.
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/v1690281001/Zendesk/Instructions/Huobi/Eng/4.png">
After copying the keys to the correct fields, click the "Connect Exchange" button.
Congratulations! You have successfully connected your API keys to J'JO. Now you can invest in J'JO system indexes or create your own cryptocurrency index or portfolio.
<h3 id="h_01HK4K5GHWNN3BDAYE48M7TNW9">Step 4</h3>
To successfully invest in the cryptocurrency market with J'JO, your assets must be hold in one of the three coins of your choice: USDT, ETH or BTC, and must be in the "Spot" wallet of the HTX exchange.
If after funding your exchange wallet or buying cryptocurrency, your assets are in a different section of the wallet, for example, in the "Fiat" section, follow the steps below to transfer them to the "Spot" section:
<ol>
<li>Go to the "Assets" section of your wallet by clicking on the button of the same name in the upper right corner.</li>
<li>In the window that opens, click on the "Fiat" button located on the left side of the screen.</li>
<li>If this section displays coins, select the coin you want to transfer, for example USDT, and click on the "Transfer" button next to the coin.
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/v1703899032/Zendesk/Instructions/Huobi/Eng/5.png">
</li>
<li>In the window that opens, select the wallet section you want to transfer the coin from (e.g. Fiat or any other) and the section you want to transfer the coin to ("Spot").
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/v1703899031/Zendesk/Instructions/Huobi/Eng/6.png" width="530" height="303">
</li>
<li>Enter the amount of coin you want to transfer and click on the "Transfer" button.</li>
<li>Check the rest of the wallet sections and repeat the procedure to transfer assets to the "Spot" section if necessary.</li>
</ol>
After completing these steps, your assets will be successfully transferred to the "Spot" section of the wallet and you can start investing in J'JO system indices.
<div id="gtx-trans" style="position: absolute; left: -146px; top: 1334.55px;">
<div class="gtx-trans-icon"> </div>
</div>

How to connect HTX (Huobi) exchange to J'JO?

How to connect Kraken exchange to J'JO?

Note: Each exchange has its own security settings for copying API keys, such as 2FA authentication. We do not include those screens as they are standard and their availability depends on the individual settings of your exchange account.
<h2 id="h_01HJS5BMNZ5D83ZCW85PESQD63" class="wysiwyg-text-align-left">To create API keys, follow these instructions:</h2>
<h3 id="h_01HJS5BMP0Q581X7648V5EY48X" class="wysiwyg-text-align-left">Step 1</h3>
Log into your account on the Kucoin exchange website.
Click on the profile button in the form of a circle with initials in the top right corner. Click on the "API Management" button.
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/Zendesk/Instructions/Kucoin/Eng/1.png">
You will be redirected to a new page where you need to click on "Create API".
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/Zendesk/Instructions/Kucoin/Eng/2.png">
1) On the page that opens, come up with any name for the key, for example, "JJO", and create a password for the API in the "API Password" field.
This password will be used when you later link your API keys to your J'JO account. Note that this password will be different from your "Trading Password". The "Trading Password" will not be used to connect your KuCoin API keys.
2) Then, check the box next to "Spot Trading".
3) Below, select the "IP Restriction" option, then insert the J'JO IP addresses, one after the other, separated by commas without spaces, into the field that opens, and click the "Add" button.
You will find the IP addresses on the page when connecting the KuCoin exchange API keys to your J'JO account.
*THE_KEY_TO_REPLACE_THE_IP_ADDRESS*
4) Ensure that the "Transfer" option is not selected. After that, click "Next".
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/Zendesk/Instructions/Kucoin/Eng/3.png" width="421" height="647">
<h3 id="h_01HJS5BMP0YTP5RRYQCFP1PHM2">Step 2</h3>
Now that the keys are created, you need to copy the "API Key (Key)" and "Secret Key (Secret)" so that you can enter them into the J'JO.
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/Zendesk/Instructions/Kucoin/Eng/4.png" width="421" height="731">
Important: You will not be able to see your "Secret Key" again if you leave this page or refresh it. Please copy and save it in a safe place.
<h3 id="h_01HJS5BMP0GXRWY3D2KDR9JF7J" class="wysiwyg-text-align-left">Step 3</h3>
Copy the "API Key" and "Secret Key" from the exchange and paste them into the corresponding fields in your J'JO account.
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/Zendesk/Instructions/Kucoin/Eng/5.png">
After the keys are copied into the correct fields, paste the API key password into the "API Password" field and click the "Connect" button.
Congratulations! You have successfully connected your API keys to J'JO. Now you can invest in J'JO system indexes or create your own cryptocurrency index or portfolio.
<h3 id="h_01HK4KVX6KRG67MFVMMG36C2DC">Step 4</h3>
To successfully invest in the cryptocurrency market with J'JO, your assets must be hold in one of the three coins of your choice: USDT, ETH or BTC, and must be in the "Trading" section of your Kucoin wallet.
If after funding your exchange wallet or buying cryptocurrency your assets are in another section of the wallet, for example, in the "Funding" section, follow the steps below to transfer them to the "Trading" section:
<ol>
<li>Go to the "Assets" section of your wallet by clicking on the button of the same name in the upper right corner.</li>
<li>In the window that opens, click on the "Funding" button located on the left side of the screen.</li>
<li>If coins are displayed in this section, select the coin you want to transfer, e.g. USDT. Then click on the "Transfer" button located opposite the coin.
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/v1703844024/Zendesk/Instructions/Kucoin/Eng/7.png">
</li>
<li>In the window that opens, select the wallet section from which you want to transfer the coin (for example, "Funding Account" or any other) and the section to which you want to transfer the coin ("Trading Account").
<img src="https://res.cloudinary.com/jjoapp-io/image/upload/v1703844025/Zendesk/Instructions/Kucoin/Eng/8.png" width="323" height="357">
</li>
<li>Enter the amount of the coin and click on the "Confirm" button.</li>
</ol>
After completing these steps, your assets will be successfully transferred to the "Trading" section of the wallet and you can start investing in J'JO System Indexes.
<div id="gtx-trans" style="position: absolute; left: 6px; top: 1179.41px;">
<div class="gtx-trans-icon"> </div>
</div>

Questions? We’re here to help.

categories